We specialize on HP DesignJet 500/510 plotter repair in Orlando and all other cities in Florida!

We provide HP 500/510 plotter repair not covered under a warranty or maintenance agreement. Is your 500 plotter need repair? We provide out of warranty plotter repair. Why would you buy DesignJet plotter repair parts or choose another plotter service Company to provide you 30, 60or 90 days warranty on parts where we offer 6 months warranty on all plotter repair parts and labor.

 

All HP Designjet 500/500PS plotter repair and service parts are compatible the only difference is Design Jet 500 plotter sizes. The difference between Design-Jet 500 24 inch and 42-inch plotter is the trailing cable, carriage belt, interconnect cable and encoder strip size. These Design Jet plotters have different main issues due to the postscript model but they use same mechanical components.

We have ample Designjet plotter belt kits and carriage belts in stock to repair Design Jet 500 24-inch C7769B, C7769BR, C7769C, C7769CR as well as Design-Jet 500 42-inch plotter model C7770B, C7770C, C7770CR and C7770BR. We stock plotter carriage belts for HP Design Jet 800 42-inch models C7780B, C7780BR, C7780C, and C7780CR.

We stock 24-inch carriage belt kits to be used on Design-Jet 800/800ps C7779C, C7779CR, C7779B, and C7779BR.

DesignJet 500 service parts in stock to provide fast plotter repair!

We carry all parts for Designjet 500, 510, 800 plotters

  • Designjet 500 / 800 ISS Ink Supply Station (New)
  • Designjet 500/800 Service Station (New)
  • Designjet 500 510 800 Carriage Assembly (New only)
  • Designjet 500 / 510 / 800 42” Carriage Belt
  • Designjet 500 / 510 / 800 24” Carriage Belt
  • Designjet 500 / 510 / 800 42” Ink Tubing System (New)
  • Designjet 500 / 510 / 800 24” Ink Tubing System (New)
  • Designjet 500/510/800 Paper Cutter
  • Designjet 500 / 800 24″ Trailing Cable
  • Designjet 500 / 800 42″ Trailing Cable
  • Designjet 500 / 510 / 800 24″ Encoder Strip
  • Designjet 500 / 510 / 800 42″ Encoder Strip

Designjet 500/510/800 Drive Roller Encoder Sensor (new)

Hp DesignJet Plotter Error Code Introduction:

System HP DJ 500/510 error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.

Continuable & non-continuable Hp DesignJet error codes:

Some HP 500 error codes are continual, which means that it is possible to press the Enter key on the front panel and to continue working with the printer.

Design Jet 500 Error Messages HP Design Jet 500/510 Plotter Error Codes
HP DJ 500 system error 01:10 A problem with the Electronics module has occurred.
HP 500 System error 01:11 The electronics module has detected a connection problem with the cooling fan.
HP 500 System error 01:12 The EEROM is not configured correctly.
HP DJ 500 System error 01:13 A problem with the Electronics module has occurred.
System error 02:10 A problem has occurred with the carriage assembly
System error 02:13 A problem has occurred with the carriage assembly.
System error 03:10 A problem has occurred with the printers power supply.
System error 04:11 Jet direct network card not detected.
System error 05:09 (DJ 500 only) Formatter installed instead of HP-GL/2 accessory card.
System error 05:10 (DJ 800 only) Formatter card failure, or Formatter card not detected
System error 05:10 (DJ 500 only) HP-GL/2 accessory card failure
System error 06:03 (DJ 800 only) Hard disk error
System error 08:11 The front panel cannot be detected.
System error 11:11 The trailing cable is poorly connected
System error 11:13 Problem with setting the voltage of the printheads
System error 12:11 A short has been detected in the carriage assembly.
System Error 17:11(DJ 500 only) A problem has been detected while initializing.
System error 21:10 A problem has been detected with the Service Station assembly.
System error 21:11 A problem has been detected with the Service Station assembly.
System error 22:10 A problem has been detected with the Ink Supply Station.
System error 41:10 A problem has been detected with the Paper-Axis motor
System error 41:13 An error in the paper-axis motor encoder quadrature has occurred.
System error 42:10 A problem has occurred with the Scan-Axis motor.
System error 43:10 A problem has occurred with the Vacuum fan.
System error 43:11 The Vacuum fan is not detected.
System error 55:11 A problem with the line sensor has occurred.
System error 56:10 Drive roller encoder sensor error.
System error 56:13 An error in the drive roller encoder sensor quadrature has occurred.
System error 61:04 Firmware error.
System error 61:05 The printer was not able to process a job that was sent.
System error 62:03 Parallel port communication problem
System error 63:03 LAN card communication problem.
System error 64:03 USB port communication problem.
System error 64:04 Firmware error (USB port).
System error 65:03 Generic input/output port communication problem.
System error 71:04 Problem allocating memory.
System error 71:06 Out of memory problem.
System error 72:04 Problem in the scan-axis (firmware error).
System error 73:04 Server error.
System error 79:04 Miscellaneous firmware error.
System error 81:01 Paper-axis shutdown.
System error 81:11 Paper-axis shutdown (during the paper advance test).
System error 85:10 Paper-axis shutdown (during the paper advance test).
System error 86:01 Carriage-Axis shutdown.
System error 86:11 Carriage-axis shutdown (during the carriage movement test).
System error 86:13 Carriage-Axis shutdown (firmware error).
System error 87:13 Unable to read the carriage encoder sensor.
System error 93:10 Ink System startup failed.